TSAT 3500 Remote – Desktop version

Specifications
The TSAT 3500 Remote – Desktop version is used in private satellite networks for mission critical applications. The unit can operate with very low forward and return link data rates (8ksps) to minimise OPEX when deployed for narrowband SCADA, M2M and IOT applications with highly asymmetrical traffic, and where the inbound throughput is dominant. The unit is fully backwards compatible with existing TSAT 3000 hubs. The unit is designed for industrial 19” rack installation.The TSAT 3500 Remote – Desktop verson is used in private satellite networks for mission critical applications. The unit can operate with very low forward and return link data rates (8ksps) to minimise OPEX when deployed for narrowband SCADA, M2M and IOT applications with highly asymmetrical traffic, and where the inbound throughput is dominant. The unit is fully backwards compatible with existing TSAT 3000 hubs. The unit is designed for industrial 19” rack installation.

Network configuration
Network topology: Star and Mesh (TDD)
Forward link: TDM
Modulation: QPSK
Data rate: 8 to 832ksps
FEC: Turbo coding 0.250 to 0.969
Return channel: TDMA
Modulation: QPSK
Symbol rate: 8 to 832kbps
FEC: Turbo coding 0.250 to 0.969

Interface
RF: N-type female, 950-2100MHz
10MHz IFL BUC and LNB reference
BUC: 24VDC – 3A max
LNB: 18VDC – 0.5A max,  Ext. Ref. – 22kHz DiSEqC tone
Data: RJ45 for IP/ETH and 9 pin D-sub for RS232/422/485
Protocols: IPv4 and IPv6 – TCP and UDP protocols andlegacy asynchronous serial
Security: Secure boot and AES link encryption (optional)
Link access: Static, Random and Dynamic (BoD)
Optimization: RoHC, IP Payload compression and serial protocol acceleration
Others: Automatic uplink power control, frequency and timing control, authentication

Environmental
Temperature: 0° to 50° C
Protection: IP30
Size: 1U – 44mm (H) x 133 mm (W) x 177mm (D)
Input voltage: 24VDCV +/- 5%
Power consumption: 10W + ODU